SureBond SB-190 12 Pack

SureBond SB-190 Everseal is a versatile, high strength, hard setting, one-part sealant that is used as an adhesive for many industrial applications. People who use the adhesive are automotive technicians, construction workers, roofers, manufacturers and mariners. Surebond is a very popular adhesive used in the installation of plastic snow guards for metal roofs. Benefits of using SB-190 as an adhesive include the facts that it:

• Creates a durable bond to material
• Allows for movement of bonded materials
• Does not become brittle or crack
• Is a pick-proof adhesive
• Is easy to apply
• Has long service and shelf life
• Is paint able
• Fast curing and hard setting

SB-190 can be used with plastic, PVC, fiberglass, metal, vinyl, glass, painted materials, cement, brick and even wood. It is not recommended to use it with copper or soft expansion joints, polystyrene or styrene containing plastic. Adhesives do not last on copper or lead. Tips for using SureBond SB-190 When using SB-190 Everseal here are some things to keep in mind.

1. When bonding items that may slide before a full cure is set, tape the item in place or tie it down. An example would be installing snow guards on a steep roof on a hot summer day. Simply tie a string behind the snow guards across the entire roof, or tape each one to the roof.
2. Clean both surfaces with Xylene / Xylol or ispropyl alcohol to make sure there is not dirt or oils.
3. Make sure paint is completed dry before attaching to a painted surface. Also, wait for a full cure before painting the adhesive.
4. Keep the cartridges around room temperature until just before it is applied. This will allow you to push the adhesive out a little easier.
5. Cut a 1/4" slanted hole in the nozzle for best flow of the product.
6. Apply when temperatures are about 50 F. Any colder and it is hard to squeeze out, it loses its tackiness, and takes longer to cure. (Remember it takes about 28 days at or above 50 F for SureBond to cure. You can achieve 50% strength in 5-7 days and 90% in 12-14 days.)
7. Do not use on copper roofs. Copper seems to prevent any adhesives from maintaining a good bond.
8. Store unopened in a cool, dry room above 40 F.
9. Apply a uniform bead with steady pressure.
10. Put items in place immediately after applying. SB-190 starts to skin over after about 20 minutes.